documentation:πbox:box_v3.4_-_installation_guide
You can download the Pibox v3.4 here:
https://p-node.org/pibox_img/pibox4_shrink.img.xz
To decompress the .xz archive, you'll need to use an utility on your operating system or download one.
You'll get an .img image that you'll need to flash onto a micro SD
card. To do this, use :
https://etcher.balena.io/
You can also use your preferred utility for this purpose.
Note: it is recommended (but not mandatory) to use a micro SD card with a minimum capacity of 16 GB, such as a SanDisk Ultra or higher.
Once the image has been flashed, remove the micro SD card from your computer and place it in your Raspberry Pi. Plug in the Raspberry Pi. It will take a few tens of seconds to boot up for the first time.
Tested on :
- Raspberry Pi 3B+ (with and without extra USB wifi dongle).
documentation/πbox/box_v3.4_-_installation_guide.txt · Last modified: 2024/10/08 17:18 by pnode