skip to content
– node
wiki
User Tools
Register
Log In
Site Tools
Search
Tools
Show page
Old revisions
Backlinks
Recent Changes
Media Manager
Sitemap
Register
Log In
>
Recent Changes
Media Manager
Sitemap
Trace:
documentation:πbox:box_v3.4_-_installation_guide
You can download the Pibox v3.4 here: \\ https://p-node.org/pibox_img/pibox4_shrink.img.xz To decompress the .xz archive, you'll need to use an utility on your operating system or download one. You'll get an .img image that you'll need to flash onto a micro SD card. To do this, use : \\ https://etcher.balena.io/ \\ You can also use your preferred utility for this purpose. //Note: it is recommended (but not mandatory) to use a micro SD card with a minimum capacity of 16 GB, such as a SanDisk Ultra or higher.// Once the image has been flashed, remove the micro SD card from your computer and place it in your Raspberry Pi. Plug in the Raspberry Pi. It will take a few tens of seconds to boot up for the first time. Tested on : * Raspberry Pi 3B+ (with and without extra USB wifi dongle).
documentation/πbox/box_v3.4_-_installation_guide.txt
· Last modified: 2024/10/08 17:18 by
pnode
Page Tools
Show page
Old revisions
Backlinks
Back to top
