Differences

This shows you the differences between two versions of the page.

--- documentation:πbox:box_v3.4_-_installation_guide [2024/10/08 17:13] – created pnode
+++ documentation:πbox:box_v3.4_-_installation_guide [2024/10/08 17:18] (current) – pnode
@@ Line 1: / Line 1: @@
 You can download the Pibox v3.4 here:
-https://p-node.org/pibox_img/pibox4_shrink.img.xz
+\\ https://p-node.org/pibox_img/pibox4_shrink.img.xz
 To decompress the .xz archive, you'll need to use an utility on
@@ Line 6: / Line 6: @@
 You'll get an .img image that you'll need to flash onto a micro SD
-card. To do this, use : https://etcher.balena.io/
+card. To do this, use :
+\\ https://etcher.balena.io/
+\\ You can also use your preferred utility for this purpose.
-You can also use your preferred utility for this purpose.
+//Note: it is recommended (but not mandatory) to use a micro SD card with
+a minimum capacity of 16 GB, such as a SanDisk Ultra or higher.//
-Note: it is recommended (but not mandatory) to use a micro SD card with
-a minimum capacity of 16 GB, such as a SanDisk Ultra or higher.
 Once the image has been flashed, remove the micro SD card from your
@@ Line 18: / Line 18: @@
 Tested on :
-Raspberry Pi 3B+.
+  * Raspberry Pi 3B+ (with and without extra USB wifi dongle).