– node

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== π-box v2 - Installation guide with a disk image ======
----
===== Hardware prerequisites =====

==== REQUIRED HARDWARE ====


  * raspberry pi 3B (it works with Raspberry Pi 2) https://www.kubii.fr/raspberry-pi-3-2-et-b/1628-raspberry-pi-3-modele-b-1-gb-kubii-640522710850.html
  * micro SD card (SDHC class10) https://www.kubii.fr/carte-sd-et-stockage/1795-carte-microsd-64go-classe-10-sandisk-kubii-619659161507.html?search_query=sd&results=112
  * USB sound card (built-in output sound is crapy and there is no input sound by default on Raspberry Pi https://www.kubii.fr/convertisseurs-adaptateurs-raspberry/2055-carte-son-externe-usb-vers-35mm-jack-adaptateur-audio-kubii-3272496009158.html?search_query=carte+son+usb&results=16
  * power plug 5v (2.1A to 3A), (don't use USB phone chargers, as 1A is not powerfull enough) https://www.kubii.fr/14-chargeurs-alimentations-raspberry/1631-alimentation-raspberry-pi-5v-25a-pour-raspberry-pi-3-couleur-noir-kubii-640522711000.html

==== RECOMMENDED HARDWARE'' ====


   * WiFi USB dongle (2 WiFi USB dongles if you have a version of Raspberry Pi < 3) to connect to internet without ethernet cable https://www.kubii.fr/claviers-et-peripheriques-usb/64-module-wi-fi-usb-wi-pi-pour-raspberry-pi-kubii-3170111000385.html
   * Radio antenna to expand the FM broadcast

==== OPTIONAL HARDWARE ====


  *  battery for mobile streams, or solar panels https://www.kubii.fr/14-chargeurs-alimentations-raspberry/1670-power-bank-li-polymer-15-000-mah-555-wh-kubii-3272496005013.html
  * sound recorder (type zoom H4) or microphones, to broadcast soundscapes

==== Also required : ====


icecast server needed for upstream !

==== REQUIRED FOR THE INSTALLATION PHASE ====


  * monitor + HDMI + keyboard
  * a computer
  * internet

===== Setup =====

==== Installation ====


  - Download Pibox image here on your computer
  - Burn the Pibox image on a SD card
  - Once completed, put the sd-card in the rapsberri pi and plug in the power cord
  - connect to the local wifi network where the SSID is "pibox_ssid"
  - connect on ssh
<code>
    $ ssh pi@192.168.100.1
</code>
change your wifi SSID (optionnal)
<code>
    $ sudo nano /etc/hostapd/hostapd.conf
</code>
And modify the value for the ssid to the desired one. default is "pibox_ssid"

expand the file system
<code>
    $ sudo raspi-config
</code>
search in the menu for expand file system
<code>
    reboot
</code>